The working principle of the double-wall corrugated pipe extrusion equipment is as follows. Firstly, the raw materials are fed into the extruder. The extruder then melts and homogenizes the materials under controlled temperature and pressure. The molten plastic is forced through a die that is specifically designed to form the characteristic double-wall corrugated structure.

We test the corrugated pipe line for our Russia customer with PVC granule and speed can reach 18m.min with sj65/25 single screw extruder 22kw motor and ABB /Delta inverter and Siemens low voltage electrical parts and pipe diameter is 16m and 32mm ,, 40mm and max 50mm with the calibration table

Double wall bellows equipment shutdown operation specification:1, terminate heating,2, first close the bin socket, stop feeding, slowly reduce the screw speed ratio, stop extrusion.

The extrusion principle of the corrugated pipe extruder is that a screw with inclined helical grooves rotates in the heated barrel. It squeezes the plastic from the hopper forward, causing the plastic to gradually heat up and be uniformly plasticized. Then the plastic is extruded and formed through the die head and the mold.

The core feature of the multi-layer co-extrusion pipe equipment lies in its multi-layer co-extrusion technology. This technology enables the simultaneous extrusion of different materials or plastic layers of different colors.

The pipe material used in the production of PE carbon spiral power communication buried conduit equipment is made of high-quality high-density polyethylene (HDPE) as the main material.

The production parameters of the double-wall corrugated pipe equipment vary significantly depending on the equipment model, pipe material specification, and the materials used (such as HDPE, PVC, etc.).

The PE single-wall corrugated pipe equipment is mainly composed of five parts: the extrusion system, the molding system, the cooling system, the tensioning system and the control system.

HDPE spiral pipe equipment is widely used in various fields such as municipal engineering, construction engineering, and agricultural irrigation.

Our PE pipe extruder come in various sizes to suit your requirements. They can be used to produce pipes ranging from small diameter up to 16mm in diameter at speeds up to 20m.min or higher depending on the product specifications.

Configuration of HDPE Spiral pipe extrusion line:Machine can make the pipe 16-80mm and 50-320mm

Operating Specifications for Shutdown of Double-Wall Corrugated Pipe Equipment:1, terminate heating.2, first close the bin socket, stop feeding, slowly reduce the screw speed ratio, stop extrusion.

The PE corrugated pipe extruder is a type of equipment used in the production of corrugated pipes made from polyethylene (PE) material.

The five-layer co-extrusion pipe production line has become the preferred choice in the industry due to its strong technical capabilities

Configuration of Corrugated pipe manufacturing machine:Hopper and vacuum loader,SJ 55/30 single screw Extruder,Match vacuum feeder and loader

The PE corrugated pipe extruder is a type of equipment used in the production of corrugated pipes made from polyethylene material.

the COD communication cluster tubes production line is composed of extruders, molds, forming machines, cutting machines, etc., and adopts PLC control systems and numerical control technology.

PE pipe extrusion equipment ‌ structural types ‌ : ‌ single-screw (suitable for ‌HDPE and other conventional materials) and ‌ twin-screw (suitable for ‌ composite material processing), and the screw length-to-diameter ratio is mostly designed to be 25:1 or above. ‌ ‌

The production process of PVC foam board production line mainly includes key steps such as material preparation, foaming process control, extrusion molding, cooling and shaping, and post-treatment. ‌

The extruder of Fresh air corrugated pipe production line is heated to 200-220 degrees for 1.5-2 hours, depending on the grade of the material. The four and five areas of the machine head are the backup areas.

This Single Wall Corrugated Pipe Machine can be used to produce single-wall or one wall corrugated pipes of PE,PP,PVC,EVA continuously,as well as PA corrugated pipes.

The composition of PE pipe extruder：Material feeder → Hopper dryer→ Extruding & Molding→ Vacuum Calibration and Cooling → Printer→ Hauling off→ Cutting →final PE pipe

The composition of the HDPE spiral pipe extrusion production line

PE/HDPE/PVC double wall corrugated pipe making production machine adopts extruding and forming process, it has the featuresof reliable quality and high efficiency.Compared with other plastic pipe wall structure ,double wall corrugated pipe has excellent wall structure design,its low weight reach the lower production cost and improve the market competitiveness.The pipe is widely used in various field instead of concrete pipe and iron pipes,because it has excellent features such as:easy connected and accessiories installed,and quality reliable.

This series Single Wall Corrugated Pipe Extrusion Machine for Electrical Use can be used to produce corrugated pipes of PVC, PE, PP, EVA continuously, as well as PA corrugated pipes. Plastic single-wall corrugated pipes have features of high temperature resistance, resistant to corrosion and abrasion, high intensity, good flexibility, etc.

The three-layer HDPE PPR pipe production line consists of vacuum calibration tank,haul off unit,cutting unit,stacker etc-. The single screw extruder and haul off unit apply famous A/C frequency conversion speed regulation device,both vacum pump and drivingmotor apply famous brand.

PE carbon spiral power communication buried casing production line is HDPE as the main material.

Our fresh air corrugated pipe production line can be used for multiple purposes. It can make single-wall corrugated pipes, double-wall corrugated pipes, double-wall perforated corrugated pipes, tunnel anti-crystallization water seepage blind pipes, indoor decoration fresh air ducts, and bamboo pipes.

Plastic HDPE PE PP PVC Single Wall Corrugated Pipe Soft Tube Production Line is made from high-quality materials and is designed to withstand the toughest conditions. It is available in a range of sizes and configurations to meet your specific needs. Whether you need a pipe line for irrigation, drainage, or other applications, we have the solution for you.

PVC powder +additive → mixer →SJSZ series extruder →Coat-hanger type mould →Vacuum calibration cooling platform →cooling rollers and edge-cutting device →Haul off →stacker

PP/PE net pipe production line is in trial operation

drilling/punching bellows production line can be large-scale perforated bellows and holed spiral bellows hose.

The advantages and functions of the cluster tube and COD tube equipment:1.High efficiency in production and processing.2.Stable performance and reliable quality.

Characteristics of prestressed plastic corrugated pipes produced by the bridge prestressed plastic corrugated pipe production line

The Advantages of Fresh Air Dwc Double Wall HDPE Corrugated Pipe Extrusion Line

Description Of single wall corrugated pipe extrusion machine

Mechanical production parameters of PVC foam board machine

The following is the pp pe net pipe product line we tested for our customer in our extrusion factory

Here we understand the advantages of prestressed plastic bellows equipment